Drapery Folds

A three Fingered Pinch Pleat is used with this method.

This method of pleating is sometimes referred to as Flat Pleating.

Rod Pocket top only. To order please inÂclude the following measurements:

1. Total finished length
2. Size of Heading
3. Size of rod pocket
4. Finished width of area to be treated.

With a rod pocket top and bottom. To order please include the following measurements:

1. Total finished length
2. Size of heading
3. Size of rod pockets
4. Finished width of area to be treated.

The illustration shows a typical installation including jabots and cravats. To order please include the following measurements:

1. Finished length of jabot
2. Depth of festoon at the deepest point
3. Depth of festoon at the shallowest point
4. Total width of area to be treated
5. Size of return required on jabot
6. Width of face of jabot

Indicate number of festoons required
*Jabots are priced separately

The illustrations show two typical festoon arrangements. The festoons are made indiviÂdually to allow for your own arrangement. To order please include the following measureÂments:

1. Finished width of the individual festoon
2. Depth at the deepest point

Please note the total finished width and shallowest point of your festoon.

Straight or scalloped bottom.
To order, please indicate the following:

1. Width of face of cornice
2. Depth at deepest point
3. Depth at shallowest point
4. Size of returns

Indicate if measurements are inside or outÂside measurements.
Indicate if you wish self welt trim or plain bottom. You may also supply your own trim. See price list for additional charges.
A simple sketch will always facilitate your order.

Specify if you require the Pull Up type or the stationary type.
Austrians are mounted oil a covered 1 " x 2 " board ready for installation.
To order please include the following information.

1. Total finished length
2. Width of area to be covered
3. Indicate style of Austrian
4. Fabric required must be 2 times finished width and 3 times finished length

Pull up type mounted on a covered I "or 2" board ready for installation.
To order please include the following information.

1. Total finished length
2. Width of area to be covered
3. Indicate if lined or unlined
4. Fabric required must be 3 times finished width. Add 24" to finished length

Your choice of either round, rectangular. fitted, throw or shaped type.
To order please indicate the following information:

1. Width of table top
2. Depth of drop
3. Length of table top